top of page
.png)
Sturdy Dock Hardware Kit and Floats For High Freeboard Semi-Floating Wood Dock
SKU 204932
Price
C$1,249.99
Product Details
BEFORE ORDERING – Check with your local building/zoning authorities and neighborhood association for permits and other requirements.
For over 20 years, team has been dedicated to waterfront do-it-yourselfers and has concocted this high-freeboard semi-floating dock kit allowing access to a floating dock (the corresponding floating dock kit is item 19218). This page presents the kit to build the semi-floating gangway. It includes heavy-duty steel hardware, premium foam-filled floats and all the bolts and screws needed for assembly. It also includes steel posts for a start from the shoreline. If you wish to install this dock section without attaching it to a floating dock, you'll need to purchase the necessary anchoring hardware. Wood is not included in this kit.
Features:
For over 20 years, team has been dedicated to waterfront do-it-yourselfers and has concocted this high-freeboard semi-floating dock kit allowing access to a floating dock (the corresponding floating dock kit is item 19218). This page presents the kit to build the semi-floating gangway. It includes heavy-duty steel hardware, premium foam-filled floats and all the bolts and screws needed for assembly. It also includes steel posts for a start from the shoreline. If you wish to install this dock section without attaching it to a floating dock, you'll need to purchase the necessary anchoring hardware. Wood is not included in this kit.
Features:
- We suggest 4 dock gangway sizes: 1.22 or 1.52 m by 3.66 or 4.88 m (4 or 5 ft. x 12 or 16 ft.)
- The Planning and Construction Guide on this page will help you configure your layout and the simple steps to follow to complete your project.
- The Specification Sheet gives details of the wood to be sourced locally.
- This semi-floating ramp is designed to be attached to a floating dock (see the page presenting item No.204934).
- This dock creates a smooth transition between shoreline and the floating dock, and because one extremity is linked to shoreline, while the other end is on floats, it will automatically adjust to water level fluctuations of up to 1 m (3 ft.)
- This kit can also be converted into a full floating dock, by adding two R-600 floats
- freeboard of approx. 51cm (20 in.)
- hot-dip galvanized, marine-grade steel
- easy to assemble
- includes everything except wood and anchoring
Includes:
- Expanded foam-filled dock floats, 61 cm x 121.9 cm x 40.6 cm (24 in. x 48 in. x 16 in.) (2x);
- Lag screws with large flat washers for floats (8x);
- Inside corners 15.2 cm x 12.7 cm x 0.6 cm (6 in. x 5 in. x 1/4 in.) (6x);
- Reinforcement plates 12.7 cm x 12.7cm x 0.6 cm (5 in. x 5 in. x 1/4 in.) (10x);
- Steel post 1.22 m. x 4.26 cm O.D.(4 ft. x 1 11/16 in. O.D.) (2x)
- Base plates 15.24 cm x 15.24 cm x 5.4 cm (6 in. x 6 in. x 2 1/8 in.) (2x)
- Leg holders 15,24 cm x 17,78 cm x 4,8 mm (6 po x 7 po x 3/16 po) (2x);
- Safety pile caps (2x)
- Heavy-duty dock hinges 12.7 cm x 12.7 cm x 0.6 cm (5 in. x 5 in. x 1/4 in.) with 1.27 cm (1/2 in.) thick female tabs and 1.9 cm (3/4 in.) male tab, connected by a 1.9 cm (3/4 in.) diameter pin (2x);
- Carriage bolts, lock washers and nuts for steel hardware (48x);
- Wood screws No.10 x 8.9 cm (3 1/2 in.) (150x)
Specifications
Commercial Grade - Yes
For Other Uses - Yes
Height - 67.31 cm (26.5 in.)
Length - 4.88 m (16 ft.)
Material - Multiple
Model - 19213
Weight - 113.4 kg (250 lb.)
Width - 1.22 m (4 ft.)
Dimensions (L x W x H): 4.9 m x 1.52 m x 67.3 cm (16 ft. x 5 ft. x 25 in.)
Weight: 254 kg (560 lb.) with lumber
Quantity
bottom of page